Bass Boat Bow Electronics Mounts

Bass Boat Bow Electronics Mounts

It's a great way to secure your fish finder

Bass boat bow electronics mounts are a great way to secure your fish finder while on the water.

They are sturdy and durable and come in many different configurations.

They are a good choice for bass boats and fishing boats with recessed trolling motor pedals. They are easy to install and can be adjusted.

Dek-It Dash Mounts

The Dek-It Dash Mount from PROcise Outdoors is a solid way to secure a fish finder on a bass boat. It’s tournament tested and approved, fits nearly any flat dash, and eliminates sun glare from hard-mounted fishfinders.

It also works well for boats with recessed foot pedals, freeing up more deck space for rod butts and trolling motor controls. It’s made from durable aluminum and has hole patterns for multiple electronics brands.

This is the most sturdy and reliable way to mount your fish finder on a bass boat. Unlike other mounting options, it’s designed to withstand pounding from rough waters.

The Dek-It Dash Mount is made from high-quality aluminum and measures 10-1/16” long by 3-1/16” wide. It includes mounting holes that are 9-1/8” long by 3” wide. The mount can be used with most major brands of fish finders and GPS units.

RAM Mounts

RAM Mounts are a proven, rugged solution for bass boat bow electronics. They are designed with a patented rubber ball and socket system that dampens shock and vibration, as well as offers almost infinite adjustability.

For mounting your marine electronic device, RAM(r) Mounts have a wide selection of bases including drill-down, suction cup, track base, and clamping options. They use the patented rubber ball and socket system for nearly infinite adjustment and include a variety of mounting holes to fit most marine devices.

In addition to RAM(r) marine electronic mounts, there are a variety of other accessories to help you secure your device and improve security. These include a RAM(r) Hi-Torq(tm) Wrench, a Pin-Lock(TM) Security Knob, and a Cable Manager.

The RAM(r) PedestalPod is specifically designed for mounting your fish finder near the bow of a bass boat. This allows for easy access to the display for changes to range, zoom or control of your trolling motor.

Flush Mount Kits

A Flush Mount Kit is convenient for mounting consumer units and distribution boards flush to the wall. They are easy to install and can be used in various settings, from domestic installations to large commercial projects.

They are available in a range of sizes and configurations to suit a variety of consumer unit or distribution board installations and are made from high-quality materials for durability. They are also easy to use and ensure a neat and professional finish.

When installing marine electronics, it's important to check behind each piece of gear to make sure they have adequate clearance and access to wiring and switches. To do this, build a template out of cardboard the size of each piece or gear you plan to mount.

If the panel has cutouts that will be covered by a flush mount fitting, round over the edges with a router before making the cuts. This will give a nice clean look and keep your equipment on the same plane for easier viewing and switch handling.

Dash Bridge Mounts

A dash bridge mount is a cool-looking way to lift your fish finder off the dashboard and make it a little easier to see. These types of mounts typically come in multiple configurations for the best fit for your boat.

These types of mounts have a small base that fits into the dash opening and a pair of arms that are adjustable to fit your needs. You can even use them to hold a GPS puck or an LCD display.

They can be a bit of a pain to install but worth it in the long run for their features and functionality. The MagBuddy is an excellent example of a dashboard mount that uses magnets to keep your device securely in place. It also boasts a few other noteworthy design features that you won’t find in any other mount.